Weergegeven resultaten: 1 t/m 3 van 3

Discussie: Brander stopt na 1%

  1. #1
    Beginner   janwatje's schermafbeelding
    Geregistreerd
    31 May 2006
    Berichten
    2
    Bedankjes
    0
    Bedankt
    0 keer in 0 posts

    Brander stopt na 1%

    Wanneer ik wil branden in Nero krijg ik telkens na 1% en foutmelding
    unknouw burnphase cdr-error

    Het volgende foutrapport volgt dan. Ik hoop dat iemand mij kan helpen.

    Nero Burning ROM
    OEM
    OEM
    serienummer
    Windows XP 5.1
    IA32
    WinAspi: -
    ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes,
    created 28-7-2004 17:51:12
    Nero version: 6.6.0.1 (Nero Express)
    Recorder:
    Version: 1.05 - HA 1 TA 0 - 6.6.0.1
    Adapter driver: <ATAPI>HA 1
    Drive buffer : 2000kB
    Bus Type : default (0) -> ATAPI, detected: ATAPI
    CD-ROM: <SONY DVD-ROM DDU1612>Version: DYS3 - HA 0 TA 1 - 6.6.0.1
    Adapter driver: <ATAPI>HA 0
    === Scsi-Device-Map ===
    DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
    CdRomPeripheral : SONY DVD-ROM DDU1612 atapi Port 0 ID 1 DMA: Off
    CdRomPeripheral : PIONEER DVD RW DVR-106D atapi Port 1 ID 0 DMA: On
    CdRomPeripheral : ZX8325G KNA804Q 2.0B vaxscsi Port 2 ID 0 DMA: Off
    CdRomPeripheral : ZX8325G KNA804Q 2.0B vaxscsi Port 2 ID 1 DMA: Off
    CdRomPeripheral : ZX8325G KNA804Q 2.0B vaxscsi Port 2 ID 2 DMA: Off
    === CDRom-Device-Map ===
    SONY DVD-ROM DDU1612 F: CDRom0
    PIONEER DVD RW DVR-106D G: CDRom1
    ZX8325G KNA804Q H: CDRom2
    ZX8325G KNA804Q I: CDRom3
    ZX8325G KNA804Q M: CDRom4
    =======================
    AutoRun : 1
    Excluded drive IDs:
    WriteBufferSize: 74448896 (0) Byte
    ShowDrvBufStat : 0
    BUFE : 0
    Physical memory : 511MB (523756kB)
    Free physical memory: 78MB (80236kB)
    Memory in use : 84 %
    Uncached PFiles: 0x0
    Use Static Write Speed Table: 0
    Use Inquiry : 1
    Global Bus Type: default (0)
    Check supported media : Disabled (0)
    30.5.2006
    UDF/ISO compilation
    21:14:50 #1 Phase 112 File dlgbrnst.cpp, Line 1853
    Unknown BurnPhase
    21:14:50 #2 Phase 114 File dlgbrnst.cpp, Line 1853
    Unknown BurnPhase
    21:14:50 #3 Text 0 File Isodoc.cpp, Line 6165
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate : FALSE
    Write : TRUE
    Finalize CD : TRUE
    Multisession : FALSE
    Burning mode : DAO
    Mode : 1
    ISO Level : 1 (Max. of 11 = 8 + 3 char)
    Character set : ISO 9660
    Joliet :FALSE
    Allow pathdepth more than 8 directories : FALSE
    Allow more than 255 characters in path : FALSE
    Write ISO9660 ;1 file extensions : TRUE
    21:14:50 #4 Phase 111 File dlgbrnst.cpp, Line 1853
    Unknown BurnPhase
    21:14:50 #5 Text 0 File Reader.cpp, Line 127
    Reader running
    21:14:50 #6 Text 0 File Writer.cpp, Line 122
    Writer PIONEER DVD RW DVR-106D running
    Nero Report 1
    Nero Burning ROM
    21:14:50 #7 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)
    21:14:50 #8 ISO9660GEN -11 File geniso.cpp, Line 3286
    First writeable address = 0 (0x00000000)
    21:14:50 #9 Text 0 File Burncd.cpp, Line 3117
    Turn on Disc-at-once, using DVD media
    21:14:55 #10 Text 0 File DlgWaitCD.cpp, Line 256
    Last possible write address on media: 2295103 (510:01.28, 4482MB)
    Last address to be written: 2225311 (494:30.61, 4346MB)
    21:14:55 #11 Text 0 File DlgWaitCD.cpp, Line 268
    Write in overburning mode: NO (enabled: CD)
    21:14:55 #12 Text 0 File DlgWaitCD.cpp, Line 2309
    Recorder: PIONEER DVD RW DVR-106D, Media type: DVD+RW
    Disc Manufacturer ID: PHILIPS, Media Type ID: 010, Product revision number: 1
    Disc Application Code: 0, Extended Information Indicators: 0
    21:14:55 #13 Text 0 File DlgWaitCD.cpp, Line 430
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
    Insert empty disc to write to.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD+R
    /RW; DVD-R/RW.)
    This disc is not empty.
    (Medium in drive: DVD+RW. Medium required by compilation: DVD+R
    /RW; DVD-R/RW.)
    Accessing disc...
    (Medium in drive: DVD+RW. Medium required by compilation: DVD+R
    /RW; DVD-R/RW.)
    21:14:55 #14 Text 0 File ThreadedTransferInterface.cpp, Line 844
    Setup items (after recorder preparation)
    0: TRM_DATA_MODE1 ()
    2 indices, index0 (150) not provided
    original disc pos #0 + 2225312 (2225312) = #2225312/494:30.62
    relocatable, disc pos for caching/writing not required/ required, no patch i
    nfos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2225312 bl
    ocks [PIONEER DVD RW DVR-106D]
    --------------------------------------------------------------
    21:14:55 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1047
    Prepare recorder [PIONEER DVD RW DVR-106D] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN: ""
    TOCType: 0x00; Session Closed, disc fixated
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 45574389
    76, ISRC ""
    DAO layout:
    ===========
    __Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
    0 | lead-in | 0 | 0x00 | 0x41
    0 | 1 | 0 | 0x00 | 0x41
    0 | 1 | 1 | 0x00 | 0x41
    2225312 | lead-out | 1 | 0x00 | 0x41
    21:14:56 #16 Phase 24 File dlgbrnst.cpp, Line 1853
    Unknown BurnPhase
    21:14:56 #17 Text 0 File Burncd.cpp, Line 4003
    Cache writing successful.
    21:14:56 #18 Phase 25 File dlgbrnst.cpp, Line 1853
    Unknown BurnPhase
    21:14:56 #19 Phase 28 File dlgbrnst.cpp, Line 1853
    Unknown BurnPhase
    21:14:56 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig a
    t #0): write at #0
    21:26:52 #21 Text 0 File WriterStatus.cpp, Line 116
    Nero Report 2
    Nero Burning ROM

    start writing Lead-Out at LBA 2225312 (21F4A0h), len
    ght 0 blocks
    21:26:52 #22 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion
    21:26:52 #23 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK
    21:26:52 #24 Phase 29 File dlgbrnst.cpp, Line 1804
    Unknown BurnPhase
    21:26:52 #25 Phase 36 File dlgbrnst.cpp, Line 1853
    Unknown BurnPhase
    21:26:53 #26 Text 0 File ThreadedTransferInterface.cpp, Line 2497
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig a
    t #0): write at #0
    21:26:53 #27 Text 0 File Cdrdrv.cpp, Line 8281
    ---- DVD Structure: Physical Format Information (00h) ----
    Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
    Book Type: DVD+RW (9), Part Version: 2
    Disc Size: 120 mm, Maximum Rate: <NOT specified>(F h)
    Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: rewritable
    Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
    Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+
    R/+RW)
    End Physical Sector Number of Data Area: 26053F h
    End Sector Number in Layer 0: 0 h
    Data in Burst Cutting Area (BCA) does not exist
    Disc Application Code: 0 / 0 h
    Extended Information indicators: 0 h
    Disc Manufacturer ID: PHILIPS.
    Media type ID: 010
    Product revision number: 1
    Number of Physical format information bytes in use in ADIP up to byte 63: 57
    Media Specific [16..63]:
    00 00 00 50 48 49 4C 49 - 50 53 00 30 31 30 01 39 ...PHILIPS.010.9
    23 00 74 80 6C 02 28 00 - 85 79 5C 02 24 00 74 80 #.t.l.(..y\.$.t.
    6C 02 28 14 13 00 E0 10 - F0 00 00 00 00 00 00 00 l.(.............
    21:26:53 #28 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 23:09,529 (1389529ms) -> OK
    21:26:53 #29 Text 0 File DVDPlusRW.cpp, Line 632
    Start write address at LBA 0
    DVD high compatibility mode: No
    21:27:09 #30 Text 0 File Cdrdrv.cpp, Line 1284
    21:27:09.000 - PIONEER DVD RW DVR-106D\H1 T0 : Queue again later
    21:27:15 #31 SCSI -1135 File Cdrdrv.cpp, Line 1432
    SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03EE0000
    Status: 0x04 (0x01, SCSI_ERR)
    HA-Status 0x00 (0x00, OK)
    TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
    Sense Key: 0x03 (KEY_MEDIUM_ERROR)
    Sense Code: 0x0C
    Sense Qual: 0x00
    CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
    Sense Data: 0x71 0x00 0x03 0xFF 0xFF 0xAC 0xA0 0x0E
    0x00 0x00 0x00 0x00 0x0C 0x00
    21:27:15 #32 CDR -1135 File Writer.cpp, Line 311
    Unknown CDR error
    21:27:15 #33 Text 0 File ThreadedTransfer.cpp, Line 229
    all writers idle, stopping conversion
    21:27:16 #34 Text 0 File ThreadedTransfer.cpp, Line 223
    conversion idle, stopping reader
    21:27:16 #35 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK
    21:27:16 #36 Text 0 File dlgbrnst.cpp, Line 1711
    Set remaining time: 0:00,000 (0ms) -> OK
    Nero Report 3
    Nero Burning ROM
    21:27:16 #37 Phase 38 File dlgbrnst.cpp, Line 1853
    Unknown BurnPhase
    Existing drivers:
    File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created
    4-8-2004 7:59:42 (Adapter driver for rec)
    Registry Keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
    Nero Report 4

  2. #2
    Geek   Kokki's schermafbeelding
    Geregistreerd
    11 May 2005
    Berichten
    2.434
    Bedankjes
    159
    Bedankt
    683 keer in 607 posts
    lees hier ook eens; het start ergens halfweg de pagina : http://www.ivanhoejupiler.be/showthr...hlight=sniffer

  3. #3
    Beginner   janwatje's schermafbeelding
    Geregistreerd
    31 May 2006
    Berichten
    2
    Bedankjes
    0
    Bedankt
    0 keer in 0 posts
    Ik heb nero opnieuw geinstalleerd en gelijke en update gedraaid. Dit heeft helaas niets geholpen
    Bijgevoegde bestanden Bijgevoegde bestanden
    Beter een Watje dan ......

Discussie informatie

Users Browsing this Thread

Momenteel bekijken 1 gebruikers deze discussie. (0 leden en 1 gasten)

Soortgelijke discussies

  1. Brander...
    Door DrKucho in forum Audiovisueel
    Reacties: 10
    Laatste bericht: 2 April 2006, 19:55
  2. dvd-rom en dvd brander
    Door Peter_J in forum PC-randapparatuur en andere PC-hardware
    Reacties: 2
    Laatste bericht: 9 March 2006, 18:08
  3. dvd/ brander
    Door louisa29 in forum PC-randapparatuur en andere PC-hardware
    Reacties: 0
    Laatste bericht: 23 February 2006, 20:03
  4. DVD Brander
    Door buud in forum Opslagmedia
    Reacties: 7
    Laatste bericht: 7 December 2005, 20:01

Favorieten/bladwijzers

Favorieten/bladwijzers

Regels voor berichten

  • Je mag geen nieuwe discussies starten
  • Je mag niet reageren op berichten
  • Je mag geen bijlagen versturen
  • Je mag niet je berichten bewerken
  •