Ik probeer een copy te maken van een Double Layer data DVD.
Momenteel heb ik geprobeerd met Nero v7.0.0.0 via een .iso (deze is 8,343 Gb groot), en tevens geprobeerd met Alcohol 120% v 1.9.5 (Build 3105) via een .mdf & mds (zelfde grootte als de .iso van Nero). Beide image zijn zonder foutmeldingen aangemaakt.
Mijn schrijver is een Philips DVDR1640P (Laatste Firmware daarstraks geinstalleerd) en ik wil branden op PLATINUM DVD+R Doublr Layer (2.4x).
Telkens als het branden gaat beginnen krijg ik een foutmelding.

Kan iemand mij helpen?
Hieronder is het Log dat door Nero wordt aangemaakt na de foutmelding.

HELP PLEASE!!!!!


5C80001080000000004666626879
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <PHILIPS DVDR1640P> Version: P3.6 - HA 1 TA 4 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8161B>Version: 0100 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDR1640P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8161B F: CDRom0
PHILIPS DVDR1640P G: CDRom4
SCSIVAX DVD/CD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785952kB)
Free physical memory: 418MB (428680kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.3.2006
Burn DVD Image
21:41:48 #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory

21:41:48 #2 Text 0 File Reader.cpp, Line 124
Reader running

21:41:48 #3 Text 0 File Writer.cpp, Line 113
Writer G: PHILIPS DVDR1640P running

21:41:48 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 8543666176
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=927:02.62 ( 4171712) RecDep=0x00
LBRK: Last LBA on layer 0 = 2085855 / 0x1FD3DF / 4073MB
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <E:\Download\Onyx_46A.nrg>

21:41:48 #5 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media

21:41:49 #6 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4171711 (927:02.61, 8147MB)

21:41:49 #7 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)

21:41:49 #8 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PHILIPS DVDR1640P, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: CMC MAG, Media Type ID: D01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

21:41:49 #9 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================

21:41:49 #10 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 4171712 (4171712) = #4171712/927:2.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4171712 blocks [G: PHILIPS DVDR1640P]
--------------------------------------------------------------

21:41:49 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [G: PHILIPS DVDR1640P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8543666176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______ ___
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4171712 | lead-out | 1 | 0x41 | 0x00

21:41:49 #12 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

21:41:49 #13 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2,4x (3.324 KB/s)

21:41:49 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

21:41:49 #15 Text 0 File DVDPlusDualLayer.cpp, Line 628
L0 Data Zone Capacity set to 2085856 (1FD3E0h, 4073MB) -> OK, confirmed setting

21:41:49 #16 CDR -1205 File DVDPlusDualLayer.cpp, Line 655
Burning Layer 1

21:41:49 #17 Text 0 File DVDPlusDualLayer.cpp, Line 665
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode

21:41:49 #18 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: embossed data (Read-only)
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D3E0 h (LBN: 1FD3E0 h, 4073 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 00 43 4D 43 20 4D - 41 47 00 44 30 31 00 40 ...CMC.MAG.D01.@
25 25 37 0B 02 3C 6A 02 - 3C 6A 1B 1C 0D 0C 0C 0C %%7..<j.<j......
02 01 01 10 00 1B 1C 0D - 0C 0C 0C 02 01 01 10 00 ................

21:41:49 #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

21:42:09 #20 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 72 01
Buffer x04d20000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

21:42:09 #21 CDR -1176 File Writer.cpp, Line 302
Session fixation error
G: PHILIPS DVDR1640P

21:42:10 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

21:42:10 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

21:42:10 #24 SPTI -1176 File SCSIPassThrough.cpp, Line 306
CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 72 03

21:42:10 #25 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders

21:42:10 #26 Phase 129 File dlgbrnst.cpp, Line 1724
Generating DVD borders completed successfully

21:42:10 #27 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2,4x (3.324 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 11:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Dit was ik vergeten te vermelden: de DVD die ik probeer te copieeren is zelf al een copy, en staat op eenzelfde type DVD+R DL als ik wil gebruiken (PLATINUM)

heb je nero ingesteld als dvd dual dus 8 gig ipv 4 gig. Probeer eens ultra iso,is een zéer handig en snel programma.

Nero is inderdaad ingesteld op DVD dual.

Ik heb ondertussen ook UltraISO geprobeerd, maar met hetzelfde resultaat.

welke foutmelding krijg je dan te zien
grtjs

"Session fixation error"

Deze foutcode heeft te maken met een dvd schijf die niet goed bij je brander past. Probeer eens andere dvd schijfje.
grtjs
probeer anders eens nero 6 terug te installeren veel problemen met nero 7.

OK zariash,

Ik zal Nero 6 eerst proberen.
Een ander schijfje zal ik pas in het weekend kunnen proberen, want dan moet ik eerst naar de shop ;-)

Nope,
Met Nero Express 6.3.1.25 krijg ik eveneens een fout als het branden begint.
Nu komt deze melding:"Burn proces failed at 2.4 speed"
Hieronder het logje van Nero 6


1A23-0081-1030-1938-0958-0385
1A23-0096-3030-1278-2542-6430
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 11:06:00
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22/07/2004 17:33:44
Nero version: 6.3.1.25 (Nero Express)
Recorder: <PHILIPS DVDR1640P> Version: P3.6 - HA 1 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8161B>Version: 0100 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6Y060L0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8161B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDR1640P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8161 F: CDRom0
PHILIPS DVDR1640P G: CDRom1
SCSIVAX DVD/CD-ROM H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 767MB (785952kB)
Free physical memory: 433MB (444196kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.3.2006
Burn DVD Image
22:22:32 #1 Text 0 File Reader.cpp, Line 126
Reader running

22:22:32 #2 Text 0 File Writer.cpp, Line 124
Writer PHILIPS DVDR1640P running

22:22:32 #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = -46268416
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=00:00.00 ( 0)
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=00:00.00 ( 0)
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=927:02.62 ( 4171712)
LBRK: Last LBA on layer 0 = 2085855 / 0x1FD3DF / 4073MB
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <E:\Download\Onyx_46A.nrg>

22:22:32 #4 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

22:22:33 #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4171561 (927:00.61, 8147MB)

22:22:33 #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)

22:22:33 #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: PHILIPS DVDR1640P, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: CMC MAG, Media Type ID: D01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0

22:22:33 #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

22:22:33 #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #0 + 4171712 (4171712) = #4171712/927:2.62
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4171712 blocks [PHILIPS DVDR1640P ]
--------------------------------------------------------------

22:22:33 #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [PHILIPS DVDR1640P ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8543666176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
4171712 | lead-out | 1 | 0x00 | 0x41

22:22:33 #11 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

22:22:33 #12 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

22:22:33 #13 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

22:22:33 #14 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2.4x (3.324 KB/s)

22:22:33 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

22:22:33 #16 Text 0 File DVDPlusDualLayer.cpp, Line 481
L0 Data Zone Capacity set to 2085856 (1FD3E0h, 4073MB) -> OK, confirmed setting

22:22:33 #17 CDR -1205 File DVDPlusDualLayer.cpp, Line 506
Burning Layer 1

22:22:33 #18 Text 0 File DVDPlusDualLayer.cpp, Line 514
Start writing layer 1 at address 0 (0h)

22:22:33 #19 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: embossed data (Read-only)
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 22D3E0 h
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 00 43 4D 43 20 4D - 41 47 00 44 30 31 00 40 ...CMC.MAG.D01.@
25 25 37 0B 02 3C 6A 02 - 3C 6A 1B 1C 0D 0C 0C 0C %%7..<j.<j......
02 01 01 10 00 1B 1C 0D - 0C 0C 0C 02 01 01 10 00 ................

22:22:33 #20 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 42:40,648 (2560648ms) -> OK

22:22:33 #21 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

22:22:48 #22 SCSI -1176 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x06040000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x01

22:22:48 #23 CDR -1176 File Writer.cpp, Line 304
Session fixation error

22:22:49 #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

22:22:49 #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader

22:22:49 #26 SCSI -1176 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x72 0x03

22:22:49 #27 Phase 127 File dlgbrnst.cpp, Line 1855
Generating DVD high compatibility borders

22:22:49 #28 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

22:22:49 #29 CDR -1176 File WriterStatus.cpp, Line 164
Session fixation error

22:22:49 #30 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once

22:22:49 #31 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

22:22:49 #32 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 11:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 21:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Ik gebruik sinds kort Ashampoo Burning Studio. Mischien daar eens mee proberen.